Brandt Appliance Repair in Duryard and St James

What does error E6 mean on a Brandt induction hob?

Error E6 on a Brandt induction hob indicates the IGBT power transistor for zone 2 has overheated. Switch off the hob and allow cooling time. Wait until the residual heat indicator turns off before touching the ceramic surface. Check ventilation is unobstructed. If the error continues, contact a specialised technician.

What does error d06 mean on a Brandt washing machine?

Error d06 on a Brandt washing machine indicates a secondary motor fault. Switch off and unplug the appliance immediately, then contact a specialised technician for motor and control board diagnosis.

What does error d04 mean on a Brandt washing machine?

Error d04 on a Brandt washing machine indicates a temperature sensor fault. Switch off and unplug the appliance, wait a few minutes, then restart. If the error reappears, contact a specialised technician for professional diagnosis.

What does error d02 mean on a Brandt dishwasher?

Error d02 on a Brandt dishwasher indicates a draining fault. Remove and clean the filters at the base of the dishwasher, check the drain hose for kinks or blockages, and ensure the drain connection is correctly installed.

What does error d14 mean on a Brandt dishwasher?

Error d14 on a Brandt dishwasher indicates an installation fault with drainage connection or water flow rate. Verify the drain hose is installed at correct height (40-90cm), ensure it's not pushed too far into the drain pipe, and check water supply pressure.

How do I clean the drain hole in my Brandt fridge?

The drain hole can be cleaned using the special cleaning tool provided, or you can use a cotton swab to remove blockages and dirt.

Is it normal for my Brandt induction hob to make noise?

Yes, sounds similar to a clock mechanism may occur when the hob is working. These are normal and related to induction technology. There may also be whistling sounds depending on your cookware.

Why are the external walls of my Brandt fridge warm?

This is completely normal operation. The warmth prevents condensation from forming on the outside of your refrigerator. The heat is generated by the condenser coils which release heat extracted from inside the fridge. The walls may feel warmer during hot weather or after adding large amounts of food.

How do I add salt to my Brandt dishwasher?

The salt container is located beneath the lower basket. Use the funnel supplied with your dishwasher and add approximately 1.5kg of dishwasher salt. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. If salt spills inside the dishwasher, run a short rinse cycle immediately to prevent corrosion.

Why are the spray arms in my Brandt dishwasher not rotating?

Water pressure powers arm rotation, so check for residue or limescale blocking the water outlet ports on the arms. Remove the arms and clean them under running water. Also verify that water is actually reaching the dishwasher.