Rangemaster Appliance Repair in Exwick

What does the E6 error code mean on a Rangemaster induction hob?

The E6 error code on a Rangemaster induction hob indicates a power board fault. Switch off the hob at the mains immediately. Induction hobs typically have two power boards, each serving two cooking zones. The power board for the affected zones will need replacing by a qualified repair engineer.

What does the Er error code mean on a Rangemaster cooker?

The Er error code on a Rangemaster cooker indicates an internal technical fault that cannot be rectified by the user. Note the complete error code displayed (including any numbers) and contact a qualified repair engineer. Do not attempt to repair internally.

What does the E4 error code mean on a Rangemaster induction hob?

The E4 error code on a Rangemaster induction hob indicates that the supply frequency is different from the rated values, or there is a fault with the induction ring. Switch off the hob and allow it to cool completely for at least 30 minutes. Try resetting by switching off at the mains for several minutes, then switch the hob on again. If the error returns, contact a qualified repair engineer.

What does the F4 error code mean on a Rangemaster oven?

The F4 error code on a Rangemaster oven indicates a sensor problem or the oven is overheating. Switch off the appliance and allow the oven to cool down for at least 60 minutes. Check for any obstructions in the oven cavity. If the error persists, the sensor or its wiring should be inspected by a qualified repair engineer.

What does the ERxx error code mean on a Rangemaster induction hob?

The ERxx error code on a Rangemaster induction hob indicates an internal technical fault that cannot be rectified by the user. Note the complete error code displayed, switch off the hob and contact a qualified repair engineer.

What does a multifunction oven do on a Rangemaster?

A Rangemaster multifunction oven offers up to eight cooking functions including fan oven, conventional oven, fanned grilling, base heat, browning element, and defrost mode. This provides flexibility for different cooking needs within a single oven cavity.

How do I clean the griddle plate on my Rangemaster?

Clean with hot soapy water only. Never use abrasive cleaners on the non-stick surface and do not put the griddle plate in the dishwasher.

How does pyrolytic self-cleaning work on a Rangemaster oven?

The pyrolytic function heats the oven to approximately 450°C, carbonising fat and grease deposits into fine ash. The door locks automatically during this high-temperature cycle for safety. The cycle takes 2, 4 or 6 hours depending on how dirty the oven is. Remove all shelves and shelf supports before starting, as the heat will discolour them. Once the oven has cooled, simply wipe out the ash with a damp cloth.

What is a Flame Safety Device (FSD) on a Rangemaster cooker?

A Flame Safety Device is a safety feature fitted to all Rangemaster dual fuel cookers. If the flame is accidentally extinguished, the FSD automatically cuts off the gas supply within 15 seconds, preventing gas from escaping into the room.

What special features do Rangemaster induction hobs have?

Features include power boost for rapid heating, pan detection that only activates when a suitable pan is detected, and boil dry protection that shuts off the zone if a pan boils dry. Some models offer a bridging zone to create a large cooking area for griddles or fish kettles, and a low temperature hold function for up to two hours.