Samsung Appliance Repair in Duryard and St James

What does error hE or HC mean on a Samsung tumble dryer?

Error hE or HC on a Samsung tumble dryer indicates a heating system problem. Turn the dryer off and wait for at least 30 minutes to allow it to cool completely before checking anything. Ensure the lint filter is clean and the ventilation hose is not kinked or blocked. If the code persists, contact a qualified technician.

What does error 85C mean on a Samsung fridge freezer?

Error 85C on a Samsung fridge freezer indicates a low voltage warning, usually caused by a brief power outage or voltage fluctuation. The fridge should continue operating normally. If the code appears frequently, check your electrical supply and consider having an electrician inspect the circuit. If the code persists, contact a qualified technician.

What does error 9E, 9C or UC mean on a Samsung washing machine?

Error 9E, 9C or UC on a Samsung washing machine indicates low voltage or irregular electrical current. Turn the machine off and unplug it from the mains for at least 30 seconds, then reconnect. Check your electrical supply and other appliances on the same circuit. If the code persists, contact an electrician or qualified technician.

What does 88 88 mean on a Samsung fridge freezer display?

The 88 88 display on a Samsung fridge freezer indicates a power supply disruption or the appliance is running a self-diagnostic check after a power cut. If the fridge is cooling properly, wait 2-3 minutes for the display to return to normal. If it does not, unplug the fridge for 60 seconds and reconnect. If the code persists, contact a qualified technician.

What does error AE or AC mean on a Samsung washing machine?

Error AE or AC on a Samsung washing machine indicates a communication error between the control panel and the main electronic board. Turn the machine off and unplug it from the mains for a few minutes, then reconnect and restart. If the code persists, contact a qualified technician.

What should I do if my Samsung Jet Bot robot vacuum is not charging?

First, check that the docking station is plugged in and the outlet is working. Clean the charging pins on both the Jet Bot and the docking station with a dry cloth. Ensure the docking station is on a flat, level surface against a smooth wall. Manually place the Jet Bot on the station, aligning the charging pins. The LED will flash red, orange, and yellow while charging, then turn green when complete. If the robot repeatedly leaves the station, the pins are not connecting properly.

How do I use pyrolytic cleaning on my Samsung oven?

Pyrolytic cleaning heats the oven cavity to extremely high temperatures to burn off grease and food residue, leaving only ash to wipe away. Remove all oven racks and accessories, close the door, select the Pyrolytic function, and the oven will clean itself. Warning: The oven exterior becomes very hot during pyrolytic cleaning. Keep children and pets away from the oven and do not attempt to open the door during the cycle. Allow the oven to cool completely before wiping away any ash residue.

How do I clean the filter on my Samsung Jet vacuum cleaner?

Turn off the vacuum and ensure it is disconnected from the charging station. Press the dustbin release button and pull out the dustbin. Remove the filter from the dustbin cover. Wash the metallic mesh grill filter and washable micro filter under running water, then let them dry completely in the shade for 24 hours before reassembling.

How do I use the Dual Cook Flex divider in my Samsung oven?

Insert the divider in the middle of the oven to separate it into two compartments. Push the divider in until you hear a beep or click, confirming proper installation. The oven will sense the divider and activate the upper compartment by default.

How do I prevent mould in my Samsung washing machine door seal?

To prevent mould in the door seal, remove wet clothes from the drum immediately after the cycle ends. Leave the door and detergent drawer open for about 20 minutes after each wash to allow air circulation. Regularly wipe the rubber door seal with a soft cloth to remove moisture and residue. Run the Eco Drum Clean cycle every 40 washes to eliminate mould and bacteria from inside the drum and door gasket.