Subzero Wolf Appliance Repair in Topsham

What does error code E2 mean on Wolf induction hobs?

Error code E2 on Wolf induction hobs indicates the induction coil has reached an excessive temperature, triggering a safety shutdown. Allow the unit to cool down completely. Switch off the circuit breaker for 30 seconds, then restore power. If the error persists, contact a specialised service technician.

What does error code 10 1 02 mean on Sub-Zero Classic refrigerators?

Error code 10 1 02 on Sub-Zero Classic Series refrigerators indicates the refrigerator cabinet thermistor is unstable, suggesting a sensor malfunction in the temperature monitoring system. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code 5022 mean on Wolf M Series ovens?

Error code 5022 on Wolf M Series ovens indicates the lower cavity has reached over-temperature during a self-clean cycle. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does ERR 03 mean on Wolf dual fuel ranges?

Error code ERR 03 on Wolf Legacy Dual Fuel Ranges indicates an open circuit detected on the RTD oven sensor, meaning the temperature sensor is not communicating properly with the control system. This may cause cooling fans to run continuously. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code 40 mean on Sub-Zero Wolf refrigerators?

Error code 40 indicates the condenser needs cleaning, typically detected after excessive compressor run times. Clean the condenser following the manufacturer's instructions. Press and hold the door ajar alarm key for 15 seconds to clear the error code. Ensure the kickplate and surrounding area allow proper ventilation. If the error persists, contact a specialised service technician.

Why does it seem like the compressor runs continuously?

It may appear that the compressor runs continuously, but because there are two independent systems and compressors, the freezer compressor could run, followed immediately by the refrigerator compressor. This gives the illusion that one or the other is running continuously when in fact they are operating independently.

How often should I run the self-clean cycle on my Wolf oven?

Run self-clean as often as needed based on your usage. Typically it is not necessary more than a few times per year. Note that Wolf gas ranges do not have a self-clean feature.

How often should I clean the condenser on my Sub-Zero refrigerator?

Clean the condenser every three to six months. If you have pets in the home, it may be necessary to clean the area more often due to pet hair accumulation.

Can I wipe my Wolf black porcelain oven interior with a damp cloth while warm?

No. Never wipe a warm or hot porcelain surface with a damp cloth or sponge. This may cause chipping or hairline cracks. Always allow the oven to cool completely before cleaning.

How do I clean the blue porcelain interior of my Wolf oven?

Allow the oven to cool completely before cleaning. Remove all oven racks and rack guides for easier access. Use a razor blade to lift baked-on foods from the oven cavity and window. Spray stubborn stains with a mild abrasive cleaner or degreaser and scrub with a non-scratch scouring pad. Do not allow foods high in sugar or acid to remain on the porcelain surface as they may cause permanent discolouration.