ASKO Appliance Repair in Exwick

What does ASKO dishwasher error code F56 mean?

ASKO dishwasher error code F56 indicates a circulation pump fault. Turn off the appliance and unplug from the mains. Do not attempt to use the appliance until it has been inspected and repaired by a qualified professional.

What does ASKO tumble dryer error code F3 mean?

ASKO tumble dryer error code F3 indicates a temperature sensor fault. Turn off the appliance, unplug from the mains, and allow it to cool completely. Do not attempt to use the appliance until it has been inspected and repaired by a qualified professional.

Why is my ASKO washing machine showing error code E6?

ASKO washing machine error code E6 indicates a heating fault. The water is not heating to the selected temperature. Turn off the appliance and unplug from the mains. You can try running a cold wash cycle to confirm other functions work correctly. If the error persists or you need heated wash cycles, contact a qualified professional for inspection and repair.

What does ASKO dishwasher error code F2 indicate?

ASKO dishwasher error code F2 indicates the overfill or flood protection has been activated. Water in the base has triggered the safety float switch. Important: If there is water on the floor, do not touch the appliance until you can safely isolate the power. Turn off the water supply valve if accessible. Unplug from the mains only if you can do so without risk of contact with water. Do not use the appliance until it has been inspected by a qualified professional.

What does ASKO washing machine error code F3 mean?

ASKO washing machine error code F3 indicates a drainage problem. The machine cannot pump out water within the expected time. Turn off the appliance and unplug from the mains before checking. Clean the drain pump filter, ensure the drain hose is not kinked, and clear any blockages from the waste pipe. If the problem persists after these checks, contact a qualified professional.

Why does my ASKO washing machine stop during the spin cycle?

The machine stops the spin cycle if there is too much imbalance. The washing machine will automatically restart the spin cycle to try to distribute the washing better in the drum. This procedure can be repeated up to 10 times. If the machine still fails to find a good balance, the programme jumps to the next step.

How often should I clean the lint filter on my ASKO tumble dryer?

Allow the dryer to cool and ensure it is switched off before cleaning. Clean the net filter after each drying cycle. The dryer may never operate without a net filter or if the net filter is damaged. A clogged net filter may result in activation of the automatic overheating switch-off device.

Is there an energy-saving mode on ASKO dishwashers?

Yes, Green Mode saves both water and energy. The temperature is lowered and each stage of the cycle is extended to achieve the same perfect washing results as a normal programme while using fewer resources.

Can I use steam to refresh clothes in my ASKO washing machine?

Yes, the Steam Refresh programme freshens garments quickly without needing detergent or rinse aid. After approximately 20 minutes of steam treatment, only a short drying time remains. Steam is highly effective and gentle for caring for shirts, jackets and trousers, and works on both natural fibres such as cotton and linen, and synthetic materials.

What is ASKO's Soft Drum technology in tumble dryers?

Soft Drum technology features circular indentations with bevelled edges that enhance air flow around the load, increasing drying efficiency. The design has a cushioning effect that reduces wear and tear on fabrics, prevents garments from tangling during drying, and results in smoother, wrinkle-free clothes. It works effectively with both small and large loads.