ASKO Appliance Repair in St Thomas

What does ASKO dishwasher error code F40 mean?

ASKO dishwasher error code F40 indicates an inlet valve leak. The inlet valve has been allowing water through when it should be closed. Turn off the appliance immediately and close the water supply valve. Unplug from the mains. Do not attempt to use the appliance. Contact a qualified professional for repair.

What does ASKO tumble dryer error code F2 mean?

ASKO tumble dryer error code F2 means the maximum drying time has been exceeded (typically 3 hours). Turn off the appliance, unplug from the mains, and allow it to cool completely before any inspection. This error typically occurs due to an overloaded drum, blocked lint filter, or poor ventilation. Reduce the load size, clean the lint filter thoroughly, and ensure adequate ventilation around the appliance. If the error persists, contact a qualified professional.

What does ASKO dishwasher error code F54 mean?

ASKO dishwasher error code F54 indicates an overfill condition. The machine has filled with too much water. Turn off the appliance immediately and close the water supply valve if accessible. Unplug from the mains. Do not attempt to use the appliance. Contact a qualified professional for repair.

What does ASKO tumble dryer error code F3 mean?

ASKO tumble dryer error code F3 indicates a temperature sensor fault. Turn off the appliance, unplug from the mains, and allow it to cool completely. Do not attempt to use the appliance until it has been inspected and repaired by a qualified professional.

What does ASKO washing machine error code E1 mean?

ASKO washing machine error code E1 indicates a temperature sensor fault. The incoming water temperature is too low for the selected programme. Turn off the appliance and unplug from the mains. Try restarting the wash programme. If the error persists, contact a qualified professional for inspection.

What is the Air Logic system on ASKO range hoods?

The Air Logic system ensures the entire surface of the range hood is used effectively for fume extraction. It features a unique hole pattern with smaller holes near the motor and larger holes at the outer edges, making the range hood extremely efficient even at lower fan settings. This allows for quieter operation while maintaining excellent extraction performance.

How does ASKO's pyrolytic oven self-cleaning work?

During the pyrolytic cleaning cycle, the oven heats to approximately 465°C, carbonising all grease and food residues into a fine ash that can be easily wiped away once the oven has cooled completely. Before starting, remove all accessories and loose food residues from the oven cavity. The oven door locks automatically during the cycle for safety. Allow the oven to cool completely before wiping out the ash.

Why does my ASKO washing machine stop during the spin cycle?

The machine stops the spin cycle if there is too much imbalance. The washing machine will automatically restart the spin cycle to try to distribute the washing better in the drum. This procedure can be repeated up to 10 times. If the machine still fails to find a good balance, the programme jumps to the next step.

Can I use steam to refresh clothes in my ASKO washing machine?

Yes, the Steam Refresh programme freshens garments quickly without needing detergent or rinse aid. After approximately 20 minutes of steam treatment, only a short drying time remains. Steam is highly effective and gentle for caring for shirts, jackets and trousers, and works on both natural fibres such as cotton and linen, and synthetic materials.

What is the Super Cleaning System on ASKO dishwashers?

The Super Cleaning System (SCS) removes food particles from the dishwasher before starting the main wash to give you a cleaner result. SCS handles multiple tasks in one step: rinsing the dishes, cleaning the interior including the filter, and selecting the best programme.