LG Appliance Repair in St David's

What does error Er CO mean on an LG fridge freezer?

Error Er CO on an LG fridge freezer indicates a communication error between the control board and display. Unplug the refrigerator for several minutes and reconnect. If the error persists, contact a specialist technician.

What does error bE mean on an LG dishwasher?

Error bE on an LG dishwasher indicates a button is stuck or being continuously pressed. Clean the control panel with a dry cloth, ensure no buttons are stuck, and restart the dishwasher. If the error persists, contact a specialist technician.

What does error LE mean on an LG washing machine?

Error LE on an LG washing machine indicates the motor is overloaded or locked. Close the water tap, unplug the machine, check if the drum is overloaded, and wait 30 minutes before restarting. If the error persists, contact a specialist technician.

What does error d80, d90 or d95 mean on an LG tumble dryer?

Error d80, d90 or d95 on an LG tumble dryer indicates exhaust airflow restriction (the number shows percentage blocked). Stop using the dryer immediately until the blockage is fully cleared, as blocked exhaust ducts are a fire hazard. Clean the lint filter, check the exhaust vent hose for lint buildup, and ensure the external vent is clear. If the error persists after clearing all visible blockages, contact a specialist technician.

What does error nP mean on an LG tumble dryer?

Error nP on an LG tumble dryer indicates no power is reaching the heating element. Unplug the dryer immediately. This error typically indicates an electrical wiring issue in your home. Contact a qualified electrician to check the electrical supply before attempting to use the dryer again.

Why is my LG tumble dryer taking too long to dry clothes?

Extended drying times are usually caused by restricted airflow. Clean the lint filter before each cycle and check the heat exchanger or condenser for lint buildup. Ensure the exhaust vent hose is not kinked or blocked. Overloading the drum prevents proper air circulation; fill to approximately half capacity for best results. Check that Energy Saver mode is not enabled if faster drying is needed. In colder weather, drying times naturally increase as the dryer takes longer to warm up.

How do I clean the inlet valve filters on my LG washing machine?

Switch off the washing machine and unplug it from the mains. Turn off the water supply taps and disconnect the inlet hoses from the back of the machine. Use pliers to carefully remove the small mesh filters from inside the inlet valve connections. Clean the filters under running water using a soft brush to remove any sediment or debris. Reinsert the filters, reconnect the hoses, and turn the water supply back on. Check for leaks before plugging in the machine.

How often should I clean the filters on my LG dishwasher?

Switch off the dishwasher and allow it to cool if recently used. Clean the filters every one to two weeks, depending on usage frequency. Remove the lower rack, twist and lift out the cylindrical filter, then remove the mesh filter beneath. Rinse under running water and use a soft brush to remove food particles. Reassemble and ensure filters are properly seated to prevent damage to the spray arms.

What is DoorCooling+ technology?

DoorCooling+ delivers cool air from vents at the top of the refrigerator compartment, helping items stored in the door cool faster than conventional cooling systems. This helps maintain consistent temperatures throughout the fridge, including in the door bins where milk and drinks are typically stored.

How often should I replace the water filter in my LG refrigerator?

Replace the water filter every six months or when the filter indicator light illuminates. If you notice reduced water flow from the dispenser, the filter may need replacing sooner. After installing a new filter, flush approximately 2.5 gallons of water through the dispenser to remove air and any carbon residue. Use only genuine LG replacement filters to maintain water quality and appliance warranty.