LG Appliance Repair in St Loyes

What does error OE mean on an LG washing machine?

Error OE on an LG washing machine indicates a drainage problem. Clean the pump drain filter at the front bottom of the machine, check the drain hose for blockages, and ensure it is correctly installed. If the problem persists, contact a specialist technician.

What does error LE mean on an LG washing machine?

Error LE on an LG washing machine indicates the motor is overloaded or locked. Close the water tap, unplug the machine, check if the drum is overloaded, and wait 30 minutes before restarting. If the error persists, contact a specialist technician.

What does error PF mean on an LG tumble dryer?

Error PF on an LG tumble dryer indicates a power failure occurred during a cycle. Allow the dryer to cool for at least 30 minutes. Press Start/Pause to resume the interrupted cycle. If the error appears repeatedly without power interruptions, contact a specialist technician.

What does error Er FS mean on an LG fridge freezer?

Error Er FS on an LG fridge freezer indicates the freezer temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

What does error HE mean on an LG dishwasher?

Error HE on an LG dishwasher indicates the water heating element is not functioning correctly. Turn off the dishwasher and restart. If the error persists, contact a specialist technician as the heater may need replacing.

Is it normal for my LG refrigerator to make noise?

Some sounds are normal during operation. A humming or buzzing indicates the compressor running. Clicking sounds occur when the defrost cycle starts or stops. Gurgling or bubbling is refrigerant flowing through the system. Rattling may indicate items on top of the fridge or the appliance touching a wall. A new refrigerator may be louder for the first 8-12 hours as it reaches operating temperature. Contact a qualified technician if you hear grinding, knocking or unusually loud noises.

What is the Tub Clean cycle and how often should I use it?

The Tub Clean cycle is a drum cleaning function that helps remove detergent residue, bacteria and odours from the washing machine drum. Run it once a month without any laundry in the machine. The cycle heats water to approximately 60°C to sanitise the drum. No detergent is required, though you may use a washing machine cleaner if desired.

How does pyrolytic self-cleaning work on my LG oven?

Pyrolytic cleaning heats the oven to very high temperatures, turning food residue and grease into ash that can be easily wiped away. The oven door locks automatically during the cycle for safety. Choose from cycle lengths of 2 to 4 hours depending on soiling level. Allow the oven to cool completely before wiping out the ash with a damp cloth. Remove racks and accessories before running the cycle.

What is DoorCooling+ technology?

DoorCooling+ delivers cool air from vents at the top of the refrigerator compartment, helping items stored in the door cool faster than conventional cooling systems. This helps maintain consistent temperatures throughout the fridge, including in the door bins where milk and drinks are typically stored.

How often should I clean the filters on my LG dishwasher?

Switch off the dishwasher and allow it to cool if recently used. Clean the filters every one to two weeks, depending on usage frequency. Remove the lower rack, twist and lift out the cylindrical filter, then remove the mesh filter beneath. Rinse under running water and use a soft brush to remove food particles. Reassemble and ensure filters are properly seated to prevent damage to the spray arms.