Smeg Appliance Repair in Exwick

What does error E17 or E18 mean on a Smeg washing machine?

Error E17 or E18 on a Smeg washing machine indicates the drum is overloaded. Remove approximately half of the laundry load and restart the cycle. Note that wash and dry capacities differ on washer dryers. If the error continues with smaller loads, contact a specialist technician.

What does error F5 mean on a Smeg pyrolytic oven?

Error F5 on a Smeg pyrolytic oven indicates a heating element fault affecting the oven's ability to reach cooking temperatures. Do not attempt to use the oven. Contact a specialist technician for an engineer visit.

What does error F1 mean on a Smeg pyrolytic oven?

Error F1 on a Smeg pyrolytic oven indicates an issue with the temperature sensing system. Switch off the oven and allow it to cool completely, then try restarting. If the error reappears, contact a specialist technician for an engineer visit.

What does error E07, E08, E09, E10 or E11 mean on a Smeg washing machine?

Error E07, E08, E09, E10 or E11 on a Smeg washing machine indicates a motor or sensor fault. Switch off the machine and do not attempt further cycles. Contact a specialist technician as these faults require an engineer visit.

What does error EA mean on a Smeg induction hob?

Error EA on a Smeg induction hob indicates a power circuit board malfunction. Switch off the hob at the mains and wait several minutes before switching back on. If the error persists, contact a specialist technician for an engineer visit.

What is the 0°C compartment in my Smeg fridge used for?

The 0°C compartment is ideal for keeping fish, meat, and other highly perishable foods fresher for longer by maintaining very low temperatures with controlled humidity. However, it is not suitable for water-based fruits and vegetables, as they could freeze at this temperature.

How do I clean the grease filters on my cooker hood?

The grease filters can be washed in the dishwasher on a cycle with a temperature below 70°C to prevent damaging the chrome coating, or washed by hand using a mild detergent. Many models have an indicator that alerts when cleaning is required.

What does an error code on my Smeg washing machine mean?

Error codes indicate different issues. For codes E05, E06, and E12, check your water supply hose to ensure it is not blocked or kinked and inspect filters. For codes E17 and E18, check you have not overloaded the machine and try removing half of the load. The CLN code indicates the appliance requires a cleaning cycle. An OPEN message means the door is not properly closed. If the issue persists after these checks, contact a qualified technician.

Do I need to preheat my Smeg oven before cooking?

Smeg ovens will automatically begin preheating when you select a cooking programme. The oven will signal when it has reached the correct temperature and food should be added.

Can I open the washing machine door during a cycle?

No, for safety reasons the door remains locked during operation. The door will unlock automatically when the cycle completes. Do not attempt to force the door open during a cycle.