Smeg Appliance Repair in Newtown and St Leonard's

What does error E8 mean on a Smeg induction hob?

Error E8 on a Smeg induction hob indicates the cooling fan is rotating at an abnormal speed. Ensure the ventilation openings beneath the hob are not blocked. If the error continues, contact a specialist technician for an engineer visit.

What does error E6 mean on a Smeg induction hob?

Error E6 on a Smeg induction hob indicates power failure to the power board. Switch off the appliance at the mains for at least 5 minutes, then switch back on. If unresolved, contact a specialist technician for an engineer visit.

What does error E01, E02, E03 or E04 mean on a Smeg washing machine?

Error E01, E02, E03 or E04 on a Smeg washing machine indicates an internal system fault. Switch off the machine, unplug it, wait a few minutes and restart. If the error reappears, contact a specialist technician for an engineer visit.

What does error E3 mean on a Smeg pyrolytic oven?

Error E3 on a Smeg pyrolytic oven indicates a short circuit in the temperature sensor. Do not attempt to use the oven. Contact a specialist technician for an engineer visit.

What does error EA mean on a Smeg induction hob?

Error EA on a Smeg induction hob indicates a power circuit board malfunction. Switch off the hob at the mains and wait several minutes before switching back on. If the error persists, contact a specialist technician for an engineer visit.

What is the removable roof liner in my Smeg oven for?

The removable roof liner or protection panel collects dirt and grease that accumulates during cooking. After allowing the oven to cool completely, it can be removed for cleaning with PULIFORNO detergent and a non-abrasive sponge, or washed in the dishwasher. This liner must be removed before running the pyrolytic cleaning cycle.

How often should I replace the carbon filters in my recirculating cooker hood?

Carbon filters should be replaced every three months to ensure optimum extraction performance, though this may vary depending on what kind of cooking you normally do and how frequently you cook. Many Smeg hoods with electronic controls have an indicator light that tells you when it is time to change the filters.

How do I clean my ceramic or induction hob?

Allow the hob to cool completely and ensure residual heat indicators are off before cleaning, as the surface may remain hot for some time after cooking. Use the Smeg Ceramic and Induction Glass Cleaner for optimal results. Remove any burned-on food using a special hob scraper, then apply the cleaner. Rinse with a damp cloth and dry with a clean soft cloth.

Why is my Smeg cooker hood not removing odours properly?

Common causes include saturated carbon filters, improper installation, blocked ducting, or a loose impeller. Active carbon filters should be replaced once every three months. Ducted models should not operate in completely sealed rooms, whilst recirculating hoods work better in closed kitchens.

What cleaning products should I use for oven cleaning?

Smeg has developed a range of cleaning products specifically for ovens and hobs. PULIFORNO is recommended for removing fatty residue from the oven cavity. XSPLEND-2 detergent spray is suitable for cleaning external stainless steel surfaces. The PAMI-1 microfibre cloth is designed for gentle cleaning.