Beko Appliance Repair in Duryard and St James

What does error code Er 01 mean on a Beko tumble dryer?

Error code Er 01 on a Beko tumble dryer indicates the door was opened during the cycle. Close the door securely and do not open it until the programme has finished. Restart the cycle if needed.

What does error code E1 mean on a Beko washing machine?

Error code E1 on a Beko washing machine indicates a thermistor (NTC temperature sensor) fault. Switch off the machine and unplug it from the mains. Wait a few minutes, then restart. If the error persists, contact a qualified technician as this fault requires professional diagnosis.

What does error code Er 06 mean on a Beko tumble dryer?

Error code Er 06 on a Beko tumble dryer indicates the compressor temperature sensor has overheated. Allow the dryer to cool down for at least 30 minutes before restarting. Clean the lint filter and condenser unit. Ensure adequate ventilation around the dryer. If the problem persists, contact a qualified technician for professional diagnosis.

What does error code E3 mean on a Beko fridge freezer?

Error code E3 on a Beko fridge freezer indicates a fridge compartment temperature sensor fault. Switch off the appliance and unplug it from the mains. The fridge temperature display may be inaccurate. Contact a qualified technician for professional inspection.

What does error code E7 mean on a Beko washing machine?

Error code E7 on a Beko washing machine indicates a level sensor fault. Switch off the machine and unplug it from the mains. The pressure switch detecting water level is not working correctly. The machine may empty during filling or fail to start. Contact a qualified technician as the pressure switch requires professional inspection.

How do I clean the spray arms on my Beko dishwasher?

Remove the upper and lower spray arms, then clean them under running water. Ensure the holes are not clogged. Use only soft tools to clear blockages; avoid sharp objects like knives which could damage the spray arms.

Why is there water leaking from my Beko fridge freezer?

Water pooling inside or beneath your fridge freezer usually indicates a blocked drain hole. The drain hole is located at the back of the fridge compartment. Switch off and unplug the appliance, then carefully clear the blockage using a cotton bud or the cleaning tool provided. A blocked drain prevents condensation from draining properly to the evaporation tray.

How do I clean the lint filter on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. Ensure the dryer is completely cool before cleaning. Open the door, remove the filter from the front of the drum, and clean off lint. If there is significant buildup, wash both parts of the filter under running water in the reverse direction of the lint buildup. Ensure the filter is completely dry before replacing.

How do I clean the door seal on my Beko washing machine?

Switch off the machine and unplug it from the mains. Use a damp cloth with warm soapy water to carefully wipe around the rubber seals. Make sure you do not lift the seals away from the metal. If dirt remains in crevices, use a toothbrush to gently scrub the surface.

How do I clean the drying sensors on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. The drying sensors are metal strips located inside the drum near the door. Wipe them gently with a soft cloth dampened with white vinegar to remove fabric softener residue and limescale. Dirty sensors can cause inaccurate drying times and clothes that are still damp after a cycle.