Beko Appliance Repair in St David's

What does error code H2 mean on a Beko dishwasher?

Error code H2 on a Beko dishwasher indicates a turbidity sensor error. Switch off the dishwasher and unplug it from the mains. The sensor that measures water cleanliness is not functioning correctly. Contact a qualified technician as this fault requires professional diagnosis.

What does error code Er 04 mean on a Beko tumble dryer?

Error code Er 04 on a Beko tumble dryer indicates the door temperature sensor has exceeded 60°C. Allow the dryer to cool down for at least 30 minutes before restarting. Ensure the room has adequate ventilation. If the error recurs frequently, contact a qualified technician for professional diagnosis.

What does error code Er 06 mean on a Beko tumble dryer?

Error code Er 06 on a Beko tumble dryer indicates the compressor temperature sensor has overheated. Allow the dryer to cool down for at least 30 minutes before restarting. Clean the lint filter and condenser unit. Ensure adequate ventilation around the dryer. If the problem persists, contact a qualified technician for professional diagnosis.

What does error code H6 mean on a Beko dishwasher?

Error code H6 on a Beko dishwasher indicates a water inlet fault. Switch off the dishwasher and unplug it from the mains. The dishwasher is not receiving water correctly. Check the water supply tap is fully open and the inlet hose is not kinked. If the problem persists, contact a qualified technician.

What does error code Er 12 mean on a Beko tumble dryer?

Error code Er 12 on a Beko tumble dryer indicates a rotary control error. The programme selector may not be functioning correctly. Switch off the dryer and unplug it from the mains. Wait a few minutes, then reconnect and try again. If the problem persists, contact a qualified technician.

How do I clean the oven door glass on my Beko oven?

Ensure the oven is switched off, unplugged, and completely cool. Clean the outer glass with warm soapy water and a soft cloth. For the inner glass, most Beko ovens have a removable inner door panel for easier cleaning. Avoid abrasive cleaners or scourers that could scratch the glass surface.

Why is my Beko washing machine not draining?

The most common cause is a blocked drain pump filter or a kinked drain hose. Check and clean the pump filter, and ensure the drain hose is not bent, twisted, or clogged.

What is the cleaning lock on my Beko induction hob?

The cleaning lock temporarily disables all controls for 20 seconds while the hob is switched on, allowing you to safely wipe the control panel. Touch and hold the cleaning lock key until you hear a signal sound.

How do I set the water hardness level on my Beko dishwasher?

For first-time use, add 1 litre of water to the salt reservoir, stir with a spoon, then adjust the water hardness level according to your instruction manual. The water hardness setting ensures the correct amount of salt is used.

How do I use the delay start function on my Beko washing machine?

Load your laundry and add detergent as normal. Select your desired wash programme, then press the delay button to set how many hours until the cycle begins. Most Beko washing machines allow delays of up to 24 hours. Press start to confirm. The display will show the countdown until the programme begins.