Beko Appliance Repair in Newtown and St Leonard's

What does error code Er 01 mean on a Beko tumble dryer?

Error code Er 01 on a Beko tumble dryer indicates the door was opened during the cycle. Close the door securely and do not open it until the programme has finished. Restart the cycle if needed.

What does error code Er 02 mean on a Beko tumble dryer?

Error code Er 02 on a Beko tumble dryer indicates an overflow switch error. Switch off the dryer and unplug it from the mains. Do not touch any water that may be in contact with the appliance. Check for any visible water leakage around the dryer. Ensure the condensate tank is properly fitted and not damaged. If the problem persists, contact a qualified technician for professional diagnosis.

What does error code F2 mean on a Beko hob?

Error code F2 on a Beko hob indicates the overheating protection has activated. Switch off the hob completely and unplug it from the mains if safely accessible. Allow it to cool for at least 30 minutes to one hour. Ensure there is adequate ventilation. If the error returns after cooling, contact a qualified technician.

What does error code E9 mean on a Beko washing machine?

Error code E9 on a Beko washing machine indicates a door lock problem. Switch off the machine and unplug it from the mains. Ensure the door is fully closed and nothing is obstructing the door seal. If the door appears jammed or the lock is not engaging, contact a qualified technician.

What does error code H6 mean on a Beko dishwasher?

Error code H6 on a Beko dishwasher indicates a water inlet fault. Switch off the dishwasher and unplug it from the mains. The dishwasher is not receiving water correctly. Check the water supply tap is fully open and the inlet hose is not kinked. If the problem persists, contact a qualified technician.

How do I clean the grease filter on my Beko cooker hood?

Switch off the cooker hood and disconnect it from the electrical supply. Pull the spring release handle to remove the filter. Soak in warm water with non-aggressive detergent for 30 minutes, then scrub gently with a soft brush. Alternatively, wash in the dishwasher on a low temperature, short cycle. Rinse thoroughly and dry completely before reinstalling. Clean monthly to prevent fire risk.

How often should I deep clean my Beko dishwasher?

Deep clean your dishwasher every few months, depending on how often you use it and how soiled your dishes typically are. Run an inner cleaning or Intensive programme with no dishes inside.

How do I clean my Beko induction hob?

Disconnect from the mains and ensure the surface is cool. Wipe with warm water, washing up liquid and a soft cloth or sponge. For tougher stains, use a specific induction hob cleaner suitable for your appliance's surface.

What should I avoid when cleaning my Beko induction hob?

Do not use metal scrapers or scouring pads to remove stains as these will scratch the smooth glass surface. Avoid abrasive cleaners that could damage the surface.

How do I check the actual temperature inside my Beko fridge?

Place a thermometer inside a glass of water and leave it on the middle shelf for 12 hours or overnight. This allows the appliance to cool the contents to the right temperature and provides an accurate reading.