Immergas Appliance Repair in St Loyes

What does the 05 error mean on an Immergas boiler?

The 05 error on an Immergas boiler indicates a flow temperature probe anomaly. The NTC temperature sensor measuring water flow temperature is reporting incorrect readings or has failed. Switch off the boiler at the electrical supply. Wait 30 seconds and switch back on to reset. If the error persists after reset, contact a qualified technician for diagnosis and probe replacement. The boiler will not operate correctly with a faulty flow probe.

What does the 25 error mean on an Immergas boiler?

The 25 error on an Immergas boiler indicates a block due to flue gas temperature gradient intervention. The boiler has detected a rapid increase in flue gas temperature, which may indicate a blocked pump, insufficient water in the heat exchanger, or other circulation problems. Switch off the boiler at the electrical supply. Allow the boiler to cool down completely for a minimum of 60 minutes. Check that all radiator valves are open and system pressure is correct. Press the reset button once after cooling. If the error recurs frequently, contact a qualified technician.

What does the 31 error mean on an Immergas boiler?

The 31 error on an Immergas boiler indicates loss of communication with the remote control or room thermostat. If using a wireless thermostat, check and replace the batteries. Ensure the thermostat is switched on and set to call for heat. Verify the thermostat is within range of the boiler receiver unit. If using a wired thermostat, check that it is switched on and calling for heat. Switch off the boiler at the electrical supply, wait 30 seconds, and switch back on. If communication is not restored, contact a qualified technician to check wiring and control compatibility.

What does the 46 error mean on an Immergas boiler?

The 46 error on an Immergas boiler indicates the low temperature safety thermostat has activated. This optional safety feature has detected temperature conditions outside normal parameters. Switch off the boiler at the electrical supply. Allow the boiler to return to normal operating conditions. Press the reset button once. If normal conditions are restored, the boiler should resume operation. If the error persists, contact a qualified technician for thermostat inspection.

What does the 03 error mean on an Immergas boiler?

The 03 error on an Immergas boiler indicates the flue safety thermostat has activated due to excessive flue gas temperature. This is a critical safety feature detecting potential flue obstruction or combustion problems. Do not attempt to reset or override this safety feature. Do not use the boiler. Ensure the room is well ventilated. Contact a Gas Safe registered engineer immediately as flue problems can lead to carbon monoxide exposure, which is potentially fatal. Do not delay professional inspection.

Does my Immergas heat pump have antifreeze protection?

Yes, Immergas heat pumps include automatic antifreeze protection that activates when outdoor temperatures drop below freezing. This prevents damage to the system and water circuits.

What annual maintenance does my Immergas boiler require?

Annual maintenance should include cleaning the heat exchanger on the fume side, cleaning the main burner, verifying correct ignition and operation, and checking burner settings for both heating and hot water phases. A visual inspection for leaks and corrosion is also required.

How does the defrost function work on my Immergas heat pump?

The heat pump automatically enters defrost mode when ice builds up on the outdoor unit's evaporator coil. During defrosting, the system reverses briefly to melt the ice, then returns to normal operation.

What do the symbols on my Immergas boiler display mean?

During normal operation, the display shows a green illumination with symbols indicating boiler status. The display typically shows the current water temperature. A flame symbol indicates the burner is active. A tap symbol relates to domestic hot water functions. A radiator symbol relates to central heating. Error codes appear as numbers or letter-number combinations when faults occur. When on standby, a horizontal segment appears. Consult your specific model manual for detailed symbol meanings as they can vary between models.

How do I switch my Immergas boiler between summer and winter mode?

Use the mode selector on the control panel or remote control to switch between modes. In summer mode, the boiler provides domestic hot water only and central heating is disabled. In winter mode, both domestic hot water and central heating are enabled. If using a CAR remote control, turn the main selector to the desired position. The display will show the current mode. Some models use icons: a sun or umbrella symbol for summer mode and a snowflake symbol for winter mode.