Teka Appliance Repair in Duryard and St James

What does the ED error mean on a Teka dishwasher?

The ED error on Teka dishwashers indicates a communication failure between the main circuit board and the display panel. Switch off the dishwasher and unplug it from the mains. Wait a few minutes before reconnecting. If the error persists, contact a specialist technician as internal wiring or circuit boards may need inspection or replacement.

What does the E8 error mean on a Teka freezer?

The E8 error on Teka freezers indicates an ice sensor failure where the sensor located behind the ice tray is either short-circuited or open. This fault affects ice production and will halt the ice maker until repairs are made. Contact a specialist technician as the ice sensor will need testing and likely replacement.

What does the Err2 error mean on a Teka washing machine?

The Err2 error on Teka washing machines indicates a drainage error where water has not drained within 6 minutes. Clean the pump filter located at the front bottom of the machine. Check the drain hose for blockages or kinks. Ensure the drain hose is not submerged in water. If the problem persists, contact a specialist technician.

What does the Err3 error mean on a Teka washing machine?

The Err3 error on Teka washing machines indicates that the temperature sensor is not properly connected or is damaged. Contact a specialist technician as this is an internal component fault that requires professional diagnosis and repair.

What does the U400 error mean on a Teka induction hob?

The U400 error on Teka induction hobs indicates an incorrect electrical connection where the hob has been connected to an inappropriate power supply. Do not use the hob. Contact a qualified electrician to verify the electrical installation meets the manufacturer's requirements. This error cannot be cleared until the connection is corrected.

How should I maintain my Teka dishwasher?

Clean the outer surfaces and door lining regularly using a soft cloth moistened with water or mild detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. After every wash, turn off the water supply and leave the door slightly open to prevent moisture and odours from being trapped inside.

How do I use the defrost function on my Teka microwave?

Press the defrost button and enter the weight of the food using the number keys. The microwave will automatically calculate the appropriate defrosting time based on the weight entered. The defrost power is preset and cannot be changed.

When should I refill the salt in my Teka dishwasher?

Refill the salt container when the salt indicator light illuminates on the control panel. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. Fill the container with approximately 1.5kg of dishwasher salt, screw the cap back tightly, and start a wash programme immediately to prevent salt residue from remaining at the bottom of the machine.

Why is there water remaining inside my Teka dishwasher at the end of the programme?

If water remains after the wash cycle completes, it usually indicates a drainage issue. Check that the drain pipe is not clogged or kinked, and ensure the dishwasher filters are clean.

Why does my Teka gas hob flame go out at the minimum setting?

If the flame goes out at the minimum setting, the flame height may not have been adjusted correctly during installation. This adjustment is part of the installation process and involves setting the gas flow for each burner according to your gas pressure. When the flame height is not set correctly, the flame failure safety device will not detect the flame and will cut off the gas as a safety precaution. Contact a qualified gas engineer to adjust the flame heights.