Teka Appliance Repair in Pinhoe

What does the Err3 error mean on a Teka washing machine?

The Err3 error on Teka washing machines indicates that the temperature sensor is not properly connected or is damaged. Contact a specialist technician as this is an internal component fault that requires professional diagnosis and repair.

What does the C81 error mean on a Teka induction hob?

The C81 error on Teka induction hobs indicates excessive temperature in the electronics or on the glass surface. The hob will switch off automatically as a safety measure. Allow the hob to cool down completely before attempting to use it again. Ensure adequate ventilation around and underneath the hob. If the error recurs frequently, contact a specialist technician to check the installation.

What does the E2 error mean on a Teka dishwasher?

The E2 error on Teka dishwashers indicates a safety level malfunction where the water level limiting system has been triggered. Interrupt the programme and switch off the dishwasher. Wait a few minutes, then switch it back on and restart the washing cycle. If the problem persists, contact a specialist technician.

What does the C82 error mean on a Teka induction hob?

The C82 error on Teka induction hobs indicates excessive temperature on the glass surface, typically caused by an empty pot or pan being heated. The hob will switch off automatically. Remove the pot or pan from the cooking zone and allow the glass to cool down completely. Never heat empty cookware on an induction hob. If the error persists after cooling, contact a specialist technician.

What does the F symbol mean on a Teka induction hob?

The F symbol on Teka induction hobs indicates that a cooking zone is activated but no suitable pot or pan has been detected. Place an induction-compatible pot or pan centrally on the cooking zone. The cookware must have a magnetic base and be the correct size for the zone. If the symbol persists with suitable cookware in place, contact a specialist technician as there may be a fault with the pan detection system.

How should I clean my Teka oven if it doesn't have pyrolytic cleaning?

After cooking, wipe the oven interior with a damp cloth while still warm to prevent buildup before it hardens. For deeper cleaning, mix 4 tablespoons of baking soda with water to make a paste, spread it on dirty areas, and leave for a few hours or overnight before wiping clean.

What does the filter saturation indicator mean on my Teka cooker hood?

When the saturation indicator illuminates, it means the filters need cleaning. After cleaning, press and hold the designated buttons (typically "+" and "-" or "Timer" and "Light") for at least 3 seconds to reset the indicator.

Why does my Teka induction hob display a pot symbol and not heat?

This symbol appears when the induction system does not detect suitable cookware on the hotplate, or the cookware is not compatible. Ensure you are using ferromagnetic cookware and that it is positioned correctly on the cooking zone.

How do I properly load my Teka washing machine?

Never overload the machine as this affects washing results. Load the machine to the maximum capacity shown in the programme table for each programme to save energy and water effectively.

Why is there excessive foam inside my Teka dishwasher after a wash?

Excessive foam is usually caused by using too much detergent or using the wrong type of detergent. Only use detergents specifically designed for automatic dishwashers.