Teka Appliance Repair in Topsham

What does the E2 error mean on a Teka induction hob?

The E2 error on Teka induction hobs indicates that the electronic unit controlling the hob has become too hot. Switch off the hob and allow it to cool down. Check that the hob installation allows for adequate ventilation underneath and ensure the cooling fan vents are not blocked. If the error recurs frequently, contact a specialist technician to review the installation.

What does the E9 error mean on a Teka dishwasher?

The E9 error on Teka dishwashers indicates that a button has been pressed continuously for more than 30 seconds, usually caused by water spillage or debris on the control panel. Clean the control panel and buttons thoroughly. Ensure the surface is dry and free from any debris or objects.

What does the E3 error mean on a Teka dishwasher?

The E3 error on Teka dishwashers indicates a heating phase error where the appliance is not reaching the required temperature within the preset time. Restart the washing programme to see if the error clears. If it persists, contact a specialist technician as the heating element or sensor may need replacing.

What does the E3 error mean on a Teka refrigerator?

The E3 error on Teka refrigerators indicates a problem with the refrigerator compartment temperature sensor. This sensor monitors the temperature in the main fridge section. Contact a specialist technician as the sensor may need inspection and replacement. Temperature regulation in the refrigerator section may be affected until repaired.

What does the E4 error mean on a Teka induction hob?

The E4 error on Teka induction hobs indicates a communication failure between the user interface and the induction heating element. Switch off the hob at the mains and wait 10 minutes before switching it back on. If the error persists, contact a specialist technician as the control board or wiring may need inspection.

How should I maintain my Teka washing machine?

Wipe out the inside of the door seal regularly to remove mould and detergent deposits. Leave the door slightly open between washes to prevent bad smells developing. Clean the inlet filter periodically using a soft brush with soapy water.

My Teka oven doesn't work. What could be the problem?

First check that there is power supply to your home and that no fuse or circuit breaker has tripped. Then verify you have followed all the instructions in your manual regarding setting the clock (on applicable models) and selecting cooking programmes and temperatures.

When should I refill the salt in my Teka dishwasher?

Refill the salt container when the salt indicator light illuminates on the control panel. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. Fill the container with approximately 1.5kg of dishwasher salt, screw the cap back tightly, and start a wash programme immediately to prevent salt residue from remaining at the bottom of the machine.

How do I defrost my Teka freezer?

For optimal performance, defrost your freezer every 3-6 months. Ice buildup reduces available space and increases energy consumption. The thawing process can be accelerated by placing bowls of hot water inside the freezer.

Why won't my Teka washing machine door open after the cycle?

The door has a safety lock that remains engaged for approximately 2 minutes after the cycle completes. Wait for the lock to release before attempting to open the door. If the door still won't open, check if there is water remaining in the drum, as the door will not unlock until the water drains. Try running a drain or spin cycle. You can also try unplugging the machine for 20-30 minutes to reset the electronic lock.