AEG Appliance Repair in Newtown and St Leonard's

What does error code C1 mean on an AEG oven?

Error code C1 on an AEG oven indicates the telescopic shelf supports have not been removed before running pyrolytic cleaning. Remove all telescopic rails, shelves and removable side rails from the oven before running the pyrolytic function.

What does error code EH0 mean on an AEG washing machine?

Error code EH0 (and EH1, EH2, EH3) on an AEG washing machine indicates a power supply issue - the voltage may be too low, too high, or unstable. Unplug the appliance. Test the socket with another appliance and check your home's electrical supply is stable. Do not use extension cables. If the problem persists, contact a qualified electrician to inspect your electrical installation.

What does error code E30 or C3 mean on an AEG washing machine?

Error codes E30 or C3 on an AEG washing machine indicate water has been detected where it should not be, typically due to a leak or pressure sensor issue. Switch off the appliance, unplug it from the mains, and turn off the water supply before any inspection. Check the water inlet hose connections at both the tap and machine, and inspect the door seal for damage. Do not use the appliance until the source of the problem is identified. If the leak source is not visible, contact a qualified technician.

What does error code E50 mean on an AEG tumble dryer?

Error code E50 on an AEG tumble dryer indicates a motor or software problem. Unplug the dryer for 30 seconds, then plug it back in and select a programme. If the error reappears, contact a qualified technician.

What does error code E70 mean on an AEG tumble dryer?

Error code E70 on an AEG tumble dryer indicates a temperature sensor fault. WARNING: This is a safety-critical issue. Do not use or attempt to restart the dryer until the problem has been professionally diagnosed. Unplug the appliance immediately and contact a qualified technician.

How do I clean my AEG ceramic or induction hob?

Ensure the hob is switched off and completely cool before cleaning. Use a hob scraper to remove burnt-on residue, then apply a ceramic hob cleaner. AEG recommends using their ceramic cleaning products for best results.

How do I use the steam cleaning function on my AEG oven?

Completely cool down the oven first. Fill the water drawer with approximately 950ml of water and select the steam cleaning function. Standard steam cleaning takes about 30 minutes; Steam Cleaning Plus lasts 75 minutes. After the cycle completes, open the door carefully and keep face and hands away to avoid steam burns.

How do I connect my AEG appliance to the My AEG app?

Download the My AEG app from the App Store or Google Play. Create an account or sign in. Ensure your appliance is WiFi-enabled and switched on. Follow the in-app pairing instructions, which typically involve selecting your appliance type and connecting to its temporary WiFi network before linking to your home network.

How can I remove bad odours from my AEG fridge?

Use special odour absorbers designed for fridge use. These help neutralise unpleasant smells that can develop from stored food.

How often should I descale my AEG steam oven?

Descale your steam oven when prompted by the display, typically every 15-30 uses depending on water hardness in your area. Use the AEG descaling product or citric acid solution. Run the automatic descaling programme and follow the on-screen instructions. In hard water areas, more frequent descaling may be required.