AEG Appliance Repair in Topsham

What does error code C3 mean on an AEG oven?

Error code C3 on an AEG oven indicates the oven door was open when attempting to start pyrolytic cleaning. Ensure the oven door is fully closed before activating the pyrolytic function. The oven will not start the cleaning cycle until the door is properly secured.

What does error code C2 mean on an AEG oven?

Error code C2 on an AEG oven indicates the food temperature probe is still connected while attempting pyrolytic cleaning. Disconnect the food sensor from its user-accessible socket (located at the top right inside the oven cavity) before running the pyrolytic function.

What does error code F6 or F7 mean on an AEG fridge freezer?

Error codes F6 or F7 on an AEG fridge freezer indicate a temperature error, which may be temporary. Keep the doors closed and allow several hours for the temperature to return to normal. If the error persists, contact a qualified technician.

What does error code F1 mean on an AEG oven?

Error code F1 on an AEG oven indicates a door closure problem, often related to the pyrolytic function. Check the door is intact, properly secured and fully closed. If the door was recently removed for cleaning, ensure it has been refitted correctly. If the problem persists, contact a qualified technician.

What does error code E08 mean on an AEG fridge freezer?

Error code E08 on an AEG fridge freezer indicates a low voltage warning - the power supply has dropped below 170V. This is a protective warning to prevent compressor damage. Check your home's electrical supply is stable. If the warning persists, contact a qualified electrician.

Why won't my AEG dishwasher start even though the power is on?

The dishwasher will only start when the door is detected to be fully closed. Open and close the door again, listening for an audible click which indicates the door is properly closed.

How do I clean the heat exchanger on my AEG washer dryer?

Switch off and unplug the machine before cleaning. Locate the heat exchanger access panel at the front bottom of the machine. Open the cover, remove any visible lint or debris, and use a vacuum cleaner with a brush attachment to clean the fins. Clean at least once a month for optimal drying performance.

Can I connect my AEG washing machine to a hot water supply?

AEG does not recommend installation using a hot water connection. While inlet valves can technically handle water up to 65°C, washing programmes don't use hot water constantly, and constant hot water supply produces poor washing results.

Can I wash and dry in one continuous cycle on my AEG washer dryer?

Yes, most AEG washer dryers offer a Non-Stop programme that automatically transitions from washing to drying. However, for best results with full loads, it's recommended to wash first, remove some items to match the drying capacity, then run the drying cycle separately.

Why is food freezing in my AEG fridge?

Check if Shopping Mode (also called Coolmatic, Frostmatic, FastCool or Fast/Freeze depending on your model) is switched on. This mode temporarily lowers the temperature and should be switched off after use.