AEG Appliance Repair in Pennsylvania

What does error code E60 mean on an AEG tumble dryer?

Error code E60 on an AEG tumble dryer indicates a heating problem - the dryer is not heating correctly. Switch off the appliance and allow it to cool for at least 30 minutes before any inspection. Ensure the dryer has adequate ventilation, clean the fluff filter and condenser unit. If the problem persists after these checks, contact a qualified technician.

What does error code E6 or E641 mean on an AEG hob?

Error codes E6 or E641 on an AEG hob indicate insufficient power - the hob is connected to only one phase. This often occurs with incorrect installation. Have a qualified electrician check the connection meets the requirements in the installation instructions.

What does error code E90, E91, E92, E93 or E94 mean on an AEG washing machine?

Error codes E90 to E94 on an AEG washing machine indicate a configuration or electronics communication error. Switch off at the mains for 30 seconds then switch back on. If the error persists, contact a qualified technician as the electronic control board may require professional diagnosis.

What does error code EH0 mean on an AEG washing machine?

Error code EH0 (and EH1, EH2, EH3) on an AEG washing machine indicates a power supply issue - the voltage may be too low, too high, or unstable. Unplug the appliance. Test the socket with another appliance and check your home's electrical supply is stable. Do not use extension cables. If the problem persists, contact a qualified electrician to inspect your electrical installation.

What does error code E30 or C3 mean on an AEG washing machine?

Error codes E30 or C3 on an AEG washing machine indicate water has been detected where it should not be, typically due to a leak or pressure sensor issue. Switch off the appliance, unplug it from the mains, and turn off the water supply before any inspection. Check the water inlet hose connections at both the tap and machine, and inspect the door seal for damage. Do not use the appliance until the source of the problem is identified. If the leak source is not visible, contact a qualified technician.

What does the 'F' message mean on my AEG induction hob display?

The letter 'F' on an induction hob indicates a connection fault with the power supply. Switch off the hob and do not attempt to use it. The appliance will need to be inspected and repaired by a qualified electrician before use.

What cookware is suitable for AEG induction hobs?

Use cookware made from cast iron, steel, enamelled steel, stainless steel, or multi-layer bases with the induction symbol. Materials that won't work include aluminium, copper, brass, glass, ceramic, and porcelain.

Why does my AEG washing machine smell bad and how can I fix it?

Bad smells are typically caused by a dirty drain filter, detergent build-up, or repeatedly using low temperatures and short wash cycles. These conditions create humidity that leads to mildew growth in the drum and detergent drawer. To eliminate odours, clean the drain pump filter regularly and wipe the door seal to remove mould - see related FAQs for safe cleaning procedures.

What does the Child Lock function do on my AEG washing machine?

The Child Lock function locks the control panel to prevent accidental programme changes during a cycle. It also keeps the door locked when activated. To activate or deactivate, typically hold two specific buttons simultaneously for 3 seconds. Check your user manual for the exact button combination for your model.

Why is food freezing in my AEG fridge?

Check if Shopping Mode (also called Coolmatic, Frostmatic, FastCool or Fast/Freeze depending on your model) is switched on. This mode temporarily lowers the temperature and should be switched off after use.