AEG Appliance Repair in St Loyes

What does error code C4 mean on an AEG oven?

Error code C4 on an AEG oven indicates the Plus Steam or Steam Bake function is still activated while attempting pyrolytic cleaning. Press the Steam Bake button to deactivate it (the indicator light will turn off) before starting the pyrolytic function.

What does error code E40 or E41 mean on an AEG washing machine?

Error codes E40 or E41 on an AEG washing machine indicate a door error - the door is not closed properly or there is a problem with the door lock. Switch off the appliance and give the door a firm push to ensure it is fully closed. Check for laundry caught in the seal. If the problem persists, unplug the appliance and contact a qualified technician.

What does error code E30 or C3 mean on an AEG washing machine?

Error codes E30 or C3 on an AEG washing machine indicate water has been detected where it should not be, typically due to a leak or pressure sensor issue. Switch off the appliance, unplug it from the mains, and turn off the water supply before any inspection. Check the water inlet hose connections at both the tap and machine, and inspect the door seal for damage. Do not use the appliance until the source of the problem is identified. If the leak source is not visible, contact a qualified technician.

What does error code CE or CF mean on an AEG tumble dryer?

Error codes CE or CF on an AEG tumble dryer indicate an electronics problem with the control board. Do not use the appliance until the problem is resolved. Unplug the dryer and contact a qualified technician to arrange a repair visit.

What does error code EF0 or EF3 mean on an AEG washing machine?

Error codes EF0 or EF3 on an AEG washing machine indicate the Aqua Control safety system has activated due to water leakage detection. This can be caused by actual leaks, excessive foam, or an unbalanced load. Switch off the appliance, unplug it from the mains, and turn off the water supply. Allow the appliance to stand for a few hours until any foam subsides. Reduce detergent usage, clean the dispenser drawer and pump filter, and check for leaks. If the problem persists, contact a qualified technician.

How do I use the steam cleaning function on my AEG oven?

Completely cool down the oven first. Fill the water drawer with approximately 950ml of water and select the steam cleaning function. Standard steam cleaning takes about 30 minutes; Steam Cleaning Plus lasts 75 minutes. After the cycle completes, open the door carefully and keep face and hands away to avoid steam burns.

How do I clean mould from the door seal on my AEG washing machine?

Switch off and unplug the machine before cleaning. Clean rubber door seals using sodium carbonate crystals, thick bleach, or dishwasher cleaner to dissolve stubborn mould and soap residue. Never mix different cleaning products as this can create toxic fumes. Ensure good ventilation during cleaning. Wear rubber gloves and protective goggles.

Why does my AEG washing machine smell bad and how can I fix it?

Bad smells are typically caused by a dirty drain filter, detergent build-up, or repeatedly using low temperatures and short wash cycles. These conditions create humidity that leads to mildew growth in the drum and detergent drawer. To eliminate odours, clean the drain pump filter regularly and wipe the door seal to remove mould - see related FAQs for safe cleaning procedures.

When should I clean or replace the carbon filter on my AEG cooker hood?

For hoods in recirculation mode, clean or replace carbon filters after approximately 160 hours of usage, or every 4-6 months. When the hood displays the letter 'C', it's time for maintenance.

How do I use the AEG ProSteam function on my washer dryer?

The ProSteam function uses steam to reduce creases and refresh garments. Select ProSteam as a standalone cycle for lightly worn clothes that need freshening, or add it to a wash programme to reduce ironing time. ProSteam is gentle on fabrics and helps reduce allergens.